Product Support for: Sound Decoders -> Soundbug for DH165xx decoders and others (SFX006)

Note the SFX006 is identical.  These instructions pertain to both Soundbugs.   1) Identify the correct orientation and mounting side of the DH165 series Decoder with SFX004 Soundbug Socket to plug this sound module into. There is text saying "SFX here" etc,. The SFX004 must only be mounted from the correct side and orientation, for each of the DH165 host decoders. 2) With correct orientation noted from step 1, align the dual row of SFX004 connector pins to the matching holes in the DH165 host PCB. Apply gentle and firm pressure behind the SFX004 connector to engage the pins until ...

I would like to re-power two old Athearn Alco PAs and sandwich a dummy PB in between. I would like to know if is possible /practical to install a sound module in the dummy unit. Actually, there's probably enough room to fit something in the A-units, but you could install sound into the B-unit if there is a way for track power to reach the sound unit. Consider the SoundBug SFX006 which replaces the SFX004): The speaker diameter is 28mm, or just a bit larger than an inch. You will need to fit the speaker into a baffle and the ...

Installation of the SFX004/SFX006 SoundBugs into a DH165-Series decoder is easy, but it does require some care. The SoundBug must be properly oriented to the decoder. Here, the DH165L0: Here, an installation in a Proto1000 DL-109. In this orientation, the SoundBug sockets are to the right on the DH165L0 decoder: The SoundBug is plugged into the sockets of the DH165L0 decoder: Because the DL-109 is a diesel locomotive, it will not need the white synchronization wire. Everything is fitted into place. The SoundBug is shipped with a small piece of foam to protect the pins of this decoder. You may ...

My son & I have PROTO 1000 Diesel EMD F3A-B Sets. The powered locos are equipped with an eight-pin plug for easy decoder installation. Our problem is that we've been looking through books & have no idea what sound card & speakers we are going to need that corresponds with these type of locomotives. I was told that they would need sound cards that are from the "Early Diesel" era. If this is true, please tell me what sound cards,speakers & wires do we need to make this happen? We are fond of F-units, and the Proto 1000 F-units are ...