Product Support for: Mobile Decoders -> 1.5 Amp Economy HO Scale Wired Mobile Decoder (DH126D)
View the Product Page for the DH126D.672” x 1.074” x .259” 17.08mm x 27.28mm x 6.6mm
Digitrax Easy Connect 9 Pin Harness
1.5 Amp/2 Amp Peak Current Rating
2 FX3 Functions, 0.5 Amp Total Function Current Rating
2 Articles Found for DH126D
The following is a list of Digitrax Power Xtenders and the Digitrax Decoders they are compatible with. Power Xtenders only work with the following Series 6 decoders. All Power Xtenders are Plug and Play. Digitrax does not support the use or installation of Power Xtenders on any other decoder not listed below. PX108-2 & PX112-2 works with:DH126D, DH126PS, DH126PDH166D, DH166PS, DH166PDH126MTDH166MTSDH186MTSDXH186MT This Power Xtender has a 2 pin plug. PX108-6 & PX112-6 works with:SDN136PSSDXN136PS This Power Xtender has a 6 pin harness with 8 ohm Oval 10x18mm speaker. PX108-6f & PX112-6f works with:DN166PS This Power Xtender has a 6 ...
OpSw Setup Enter OpSw mode by pressing the OpSw button. The OPS and ID light will flash alternating RED and GREEN. Use your throttle in SWITCH mode to set switches to thrown or closed to match your desired OpSw setting. There are currently no published OpSws for the BXPA1. If you erroneously set an OpSw, the BXPA1 can be factory reset by setting OpSw40 = Closed Trip Speed Pot The Trip Speed Pot can be adjusted to set the speed at which auto reversing and power management is resolved. Turning the pot clockwise will make the speed slower and turning ...