Keep Alive Power Jack (For DT200 & BT2) When the layout is powered down we recommend that you change the DT200 that is running as the Command Station to Advanced Throttle mode so it can power down and conserve its battery. Do this by pressing Run/Stop & Left Arrow keys together. All other Advanced Throttles on LocoNet will power down and show "idLE" when the LocoNet bus wires (pins 3 and 4 of the RJ12 plug) fall below +5Volts for more than 1/4 of a second. If the RailSync lines on LocoNet (pins 1 and 6 of the RJ12 plug) ...
I own a Digitrax Starter Set that is now discontinued. Can I still use it and can it be upgraded?LocoNet lets you use all Digitrax LocoNet components in your system no matter when you purchased them. You can continue to use what you already own with new components as they become available. Note: This will work with all starter sets except for Challenger. If you have a Challenger Set and you want to move up, the best thing to do is to purchase one of the new sets and use the DB100 series booster that came with your Challenger as ...