Challenger Series Starter Sets

CTX/CTY throttles allow you to have up to 4 separate throttles controlled by 4 different operators rather than 4 throttles controlled by one operator as in the CT4 that comes with your Challenger Set. Digitrax provides these instructions so that you can build your own throttles to your own specifications. You are free to choose any knobs, buttons & cases you like, the ones on the parts list below are just suggestions. These throttles give you the option of expanding your operations cost effectively. The CTX throttle controls speed & direction for one train in the operating group & can ...

Note: This page applies only to Challenger SetsOur customers continue to come up with different combinations & configurations to suit their individual needs so, feel free to customize your own CTX/CTY!Some users choose to hard wire 4 throttles for the 4 different channels so that the throttles are not able to change locomotives within the group.Parts List:Radio Shack Part NumbersSW-1: 6 Position Rotary Selector Switch, # 275-1386, CTX 1, CTY 1C1-C4: 0.047uf Disc Ceramic Capacitors 50v, # 272-134, CTX 2, CTY 2D1-D5: 1N4148/1N914 Small Signal Diodes 50v/100ma, # 276-1620, CTX 1, CTY 2SW-2/SW-6: Normally Open Push Button Switch, # 275-1566, ...

Challenger was Digitrax' first commercially produced system.  It was manufactured from 1993 to 1998.It included:A CT4 analog throttle that controlled 4 addresses.  These were color coded.A DB100 command station/booster.A decoder (either HO or N scale).The CT4 throttle is the only throttle ever manufactured by Digitrax that could not be used on other Digitrax systems.