The SE8C can be used in 2 aspect mode.
The signal control address range will be in blocks of 32 instead of 64.
To use this mode set Option Switch 02 to closed (OpSw02=c).
KB918: Signaling-2 aspect mode-SE8C
This article was last updated on Oct. 25, 2010, 12:54 p.m. | Print Article | Leave Feedback
The SE8C can be used in 2 aspect mode.
The signal control address range will be in blocks of 32 instead of 64.
To use this mode set Option Switch 02 to closed (OpSw02=c).