How To Turn Track Power On and Off with the DT400 series throttle
Turn track power on:
Press the PWR Key, then press the Y + Key and the Track Power Indicator on your DT400 series display and on your command station will come on solid.
If the track power indicator is blinking, press the Y+ key again to make it solid.
Turn track power off:
Press the PWR Key , then press the N - Key .
The Track Power Indicator on your DT400 series and on your command station will go off.
To Exit:
Exit PWR mode by pressing the PWR Key again or by pressing any other key on the throttle to initiate the next throttle task.
Note: Tethered or Radio only throttles must be plugged in