DH82 1 Amp HO Scale Mobile Decoder
This product has been replaced by the 2 Amp Mobile Decoder (DH83) and is no longer available. Click here to view the DH83.
Early Digitrax 1 Amp Mobile Decoder decoder Featuring Non-Standard wire colors, Stamped as both DH82 and DH82F
Retired in 1994
*DH82 & DH82F used the following non-standard wire colors:
|
Used For |
Wire Color |
|
Power Right |
Orange |
|
Power Left |
Red |
|
Motor + |
Violet |
|
Motor – |
Blue |
|
F0 Forward |
Yellow |
|
F0 Reverse |
Brown |
|
Lamp common |
Green |
|
Function 1 |
Black |
|
Function 2 |
White |
Specifications
- Current Rating-Motor
- 1.0/1.5 Amps
- Size
- 0.67” x 1.05” x 0.25” (17.02mm x 26.67mm x 6.35mm)
- Installation
- Wired (read more)
Decoders with wires provided for hooking up the decoder in the locomotive. If wires are not provided for hooking up functions, solder pads are provided to allow you to access those functions by adding wires.
Digitrax Mobile Decoder Wire Colors
What the wires are for
Wire Color
Power Pick-up Right (Engineer's Side)
Red
Power Pick-up Left (Fireman's Side)
Black
Motor + Right Brush
Orange
Motor – Left Brush
Gray
F0(Fwd)-Forward Light
White
F0(Rev)-Reverse Light
Yellow
Lamp Common
Blue
F1-Function 1
Green
F2-Function 2
Violet
F3-Function 3
Brown
F4-Function 4
White w/ Yellow Stripe
F5-Function 5
White w/ Green Stripe
F6-Function 6
White w/ Blue Stripe
Note: DH82 & DN92 decoders, some of the very first decoders produced by Digitrax used a different wiring color code. Please check decoder spec sheets for the wire colors that were used with these decoders.
- Function Outputs
- 4 - 200mA
- Function Type
- STD
- Replaced by
- DH83/DH83F