BDL168 LocoNet Occupancy Detector, 16 Detection Sections
This product has been replaced by the Block Detector (BDL716) and is no longer available. Click here to view the BDL716.
The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections.
Lets you know when detection sections of your layout are occupied.
When used in conjunction with one or two RX4 transponder detectors it operates up to 8 transponding zones and operations mode read back.
Know what is where on your layout!
BDL History: BDL16 was released in 2000 and was replaced by BDL162 in 2002. An update kit was available from BDL16 to BDL162. BDL162 was replaced by BDL168 in 2004. No update kit was offerred because the circuit board was completely re-engineered.
BDL168 Features:
-
Occupancy detection for 16 sections
-
Outputs for LEDs to indicate local detection section occupancy and zone power status on a panel mount display
-
3 Amp capacity per detection section
-
Transits Occupancy information over LocoNet
-
Supports SuperSonic decoder operations
-
Detects any powered locomotive
-
Detects any un-powered rolling stock equipped with resistor wheel sets
-
Plug 'N Play with Digitrax DCC
-
Configurable with most other DCC systems
-
Automatically checks layout status when used in conjunction with a computer
-
Improved Rail Sync Sampling for reliable operation
-
Transponding with the addition of one or two RX4 allows for 8 transponding sections
-
Transponding decoders are detected by the RX4s and the information is fed back to LocoNet
-
Transponding allows you to read back CV values of decoders equipped with transponders
Note: External power supply is needed. PS14 (sold separately) or equivalent is recommended. Multiple BDL16 series detectors can be powered from the same power supply as long as 100mA is provided for each BDL16 series detector.
Specifications
- For Use With
- RX4s to add transponding
- For Use With
- RD2 Remote Sensing Diodes to set up remote sensing locations
- Original Release Date
- 06-15-2004
- Warranty
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
2. Click here to send Digitrax Tech Support a message.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.