BD4 Occupancy Detector for 4 detection sections
This product has been replaced by the DCC 4 Block Occupancy Detector (BD4N) and is no longer available. Click here to view the BD4N.
When used in conjunction with the DS64 or SE8C the BD4 provides LocoNet detection for 4 occupancy detection sections.
BD4 lets you know which detection sections of your layout are occupied by locos and rolling stock.
BD4 Features:
-
Cost Effective occupancy detection for 4 detection sections
-
Outputs for panel mounted LEDs to display occupancy
-
Detects any powered locomotive
-
Detects un-powered rolling stock equipped with resistor wheel sets
-
Transmits occupancy information to your LocoNet System using DS64 or SE8C (sold separately).
-
Connects to LocoNet via your DS64 or SE8C stationary decoders to transmit occupancy information to your LocoNet system (also works with DS54s (discontinued))
-
Anti-Chatter Filter for Reliable occupancy detection
-
5 Amps Peak, 3 Amp continuous capacity per detection section.
NOTE: Not recommended for layouts using "supersonic" decoders unless the "supersonic" feature is turned off in all decoders.
Specifications
- Current Rating-Motor
- 3.0 Amps Continuous (5.0 Amps Peak)
- For Use With
- DS64 or SE8C
- Original Release Date
- 06-15-2004
- Warranty
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
2. Click here to send Digitrax Tech Support a message.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.