TL1 Single DCC Function Decoder with Integrated Transponding
TL1 Single DCC Function Decoder with Integrated Transponder
-
Your TL1 can be used as:
-
1. Function only DCC decoder with transponding
-
2. Digitrax Transponder
-
3. Function only DCC decoder without transponding.
-
Single 125mA (250mA peak) function output for lights or other functions
-
Function can be turned on/off using F0, F1, F2, F3, or F4
-
Supports both 2 digit and 4 digit addressing
-
Programmable from DCC compatible equipment
-
Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc.
-
Compatible with Digitrax DCC Transponding Systems
-
Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)
Specifications
- Size
- 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)
- Installation
- Wired (read more)
Decoders with wires provided for hooking up the decoder in the locomotive. If wires are not provided for hooking up functions, solder pads are provided to allow you to access those functions by adding wires.
Digitrax Mobile Decoder Wire Colors
What the wires are for
Wire Color
Power Pick-up Right (Engineer's Side)
Red
Power Pick-up Left (Fireman's Side)
Black
Motor + Right Brush
Orange
Motor – Left Brush
Gray
F0(Fwd)-Forward Light
White
F0(Rev)-Reverse Light
Yellow
Lamp Common
Blue
F1-Function 1
Green
F2-Function 2
Violet
F3-Function 3
Brown
F4-Function 4
White w/ Yellow Stripe
F5-Function 5
White w/ Green Stripe
F6-Function 6
White w/ Blue Stripe
Note: DH82 & DN92 decoders, some of the very first decoders produced by Digitrax used a different wiring color code. Please check decoder spec sheets for the wire colors that were used with these decoders.
- Original Release Date
- 06-15-2001
- Warranty
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
2. Click here to send Digitrax Tech Support a message.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.