Click here for the
PDF version of the Super Empire Builder Manual
Note: Digitrax Starter Sets do not include mobile decoders
or power supplies. There are a wide variety of DCC decoders
available today and some are made to fit specific locomotives.
Some decoders have more features and cost more money and some
are less expensive with fewer features. Your Digitrax authorized
dealer will be able to assist you in choosing the “right”
decoder for your layout. Click here to visit our mobile
and stationary decoder
selection pages. There are many different power supplies that
you can use to power your Digitrax system and you may already
own an appropriate power supply so rather than force you to
purchase a power supply you may not need, we leave that decision
up to you and your dealer. Click here to learn about Digitrax
power supplies that are available.
DT400 Super Throttle & DB150 Command Station
Offers
-
User interface makes DCC simple.
-
Dual throttle controls.
-
Full numeric key pad.
-
Simplified 4 digit addressing.
-
Easy address browsing and selection.
-
User friendly text messages to guide you.
-
Click encoders for smooth speed control.
-
Multi-line LCD display puts all the information you
need right at your fingertips.
-
Infra-ready out of the box. Radio equipped version
also available.
-
Ready for transponding and cab signaling.
Plenty of Capacity for Most Layouts
Over 9000 Locomotive Addresses
-
Address 00 for operation of one or more locos without
decoders
-
Two Digit Addressing is easy to use. (Address 01-127)
-
Four Digit Addressing-use the road number of your
engines as their addresses. (Address 0128-9000+).
5 Amps of Power to run more trains.
- Selectable scale voltage for safe operation in ALL
scales.
Function Control
-
Control 13 functions-F0 through F12.
-
Function 2 is a special non-latching key that can
be used to sound the horn for as long as the key is
held down.
-
Constant brightness lighting. Headlights can be directional
or independently controlled (depending on decoder).
Decoder Programming
-
Built in programmer that can write all CVs.
-
Supports Paged programming (Digitrax preferred method).
Also supports direct & register mode programming.
-
Operations mode programming can be used to program
decoders on the layout.
Stationary Decoders, Turnout Control & Turnout Position
Reporting
-
Access to stationary decoder control for turnouts
and other devices.
-
DT400 reports turnout position based on last command
sent.
-
Control 999 stationary decoder addresses.
Consisting
-
Universal consisting, Digitrax preferred method. ALL
locos can be consisted, even analog locos.
-
Advanced consisting, allows only advanced consist
capable mobile decoders.
-
Basic consisting, program decoders to run on same
address.
UP5 Universal Panel
-
Makes LocoNet hook up simple!
-
2 LocoNet jacks for hooking up your LocoNet network.
-
3 throttle jacks for hooking up throttles and other
non-RailSync devices.
-
Included with non-radio sets. Radio equipped sets
include UR91 radio receiver.
Expandability with Digitrax LocoNet
-
Use Super Empire Builder as a starting point, then
add components.
-
Use Super Empire Builder as an expansion set with
Digitrax equipment you already have installed.
Super Empire Builder is more than just a starter set!
-
Because all Digitrax Sets are value priced, they are
great as expansion sets for existing systems.
-
So, if you need another booster and throttle, it is
a much better deal to buy a set!
|
