PS2012 20 Amp Power Supply 12 to 23 VDC
This product has been replaced by the 20 Amp Power Supply 13.8-23VDC (PS2012E) and is no longer available. Click here to view the PS2012E.
This big regulated power supply delivers more power with less heat for more efficient booster operation. 20 Amp PS2012 regulated powersuply is usable with all scales to operate up to 4 Five amp boosters.
PS2012 Features:
-
Operate one or more boosters
-
Scale selectable switch for use with N,HO or large scale
-
Design Coordinated for use with Digitrax products
-
Built-In unit over-curren and over-temp protection
-
DC Output Current Ammeter
-
On/Off switch
-
Integral Cooling fan
-
One "Y" cable (p/n YC52) Included for convenience with dual 5 amp protected outputs
Specifications
- Original Release Date
- 06-15-2004
- Current Rating
- 20 Amp selectable output 13.8, 18 or 23 volts
- Warranty
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
2. Click here to send Digitrax Tech Support a message.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.