Digitrax.com: Application Note: Using Digitrax PR2 USB Port Adaptor


		Starter Sets Mobile Decoders Sound Decoders Stationary Decoders Throttles Boosters Power Management Power Supplies Wireless Control Computer Control Detection and Signaling Transponding Accessories


		Using Digitrax PR2 with USB Ports This application note shows how you can use your Digitrax PR2 Programmer with the USB Port on your computer. The PR2 Programmer is a serial device that connects to a computer via a 25pin serial port. Serial ports are not available on most computers in current production. USB ports are more widely used today. The Digitrax PR2 Programmer can be connected to a USB port by using a USB to Serial RS-232 DB-25 Adapter Cable. Caution: Not all cables on the market will work. One that worked with our test computer running Windows 98SE is the VScom USB Serial Adapter. It comes with an installation CD with a driver that must be installed as instructed in the documentation for proper operation. This product supports Windows 98SE, ME, windows 2000 and Windows XP and is available from Byterunner. http://www.byterunner.com/byterunner/product=USB+to+Single+25-pin+Serial+Ada pters While we have not extensively tested this adapter cable with lots of computers and operating systems, we think it is likely that it will work in machines running Windows 98SE and Windows XP.

	Digitrax is a proud sponsor of the World’s Greatest Hobby Program!
	Zephyr was chosen as the Most Innovative Product by Readers of Model Railroader Magazine and was selected as the Best New Model Railroad Accessory by Hobby Outlook Magazine!