New Advanced Boosters!

Feb. 7, 2017

New Advanced Boosters!

These new advanced boosters are designed to give you more power to run your trains.  The new boosters offer 3,5, or 8 amps of output power to better match the Command Station of your choice.  They are available as a DB210 single booster in regular or opto-isolated offering up to 8 amps of power, or the extra powerful DB220 dual booster offering up to 16 amps of power total.  Front dip switches allow for quick setup of Amps, AutoReversing, scale voltage, and operation mode.  Also equipped with custom voltage trim so you can have consistent track voltage throughout your layout.   The units can also be IPL updated and support LocoNet statistic reporting via an updated DT500.  

DB210 

  • Single 3/5/8 Amp AutoReversing DCC Booster 
  • Up to 8 Amps of power total
  • N, HO, & Large Scale Operations with Custom Voltage Trim
  • LocoNet for easy plug ‘n play installation and system expansion
  • Easy dip switch setup
  • Auto resetting over temperature and short circuit protection
  • Track status indicators
  • Stabilized track drive output
  • Over-voltage protected
  • Auto-Shutdown when command control signal is lost to prevent “runaway” trains
  • IPL updatable

View Product: http://www.digitrax.com/products/command-stations-boosters/db210/

 

DB220

  • Dual 3/5/8 Amp AutoReversing DCC Booster 
  • Up to 16 Amps of power total
  • N, HO, & Large Scale Operations with Custom Voltage Trim
  • LocoNet for easy plug ‘n play installation and system expansion
  • Easy dip switch setup
  • Auto resetting over temperature and short circuit protection
  • Track status indicators
  • Stabilized track drive output
  • Over-voltage protected
  • Auto-Shutdown when command control signal is lost to prevent “runaway” trains
  • IPL updateable 

View Product: http://www.digitrax.com/products/command-stations-boosters/db220/

 

DB210 OPTO

  • Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)
  • Up to 8 Amps of power total
  • Opto-Isolated for layouts with common rail wiring
  • N, HO, & Large Scale Operations with Custom Voltage Trim
  • LocoNet for easy plug ‘n play installation and system expansion
  • Easy dip switch setup
  • Auto resetting over temperature and short circuit protection
  • Track status indicators
  • Stabilized track drive output
  • Over-voltage protected
  • Auto-Shutdown when command control signal is lost to prevent “runaway” trains
  • IPL updatable

 View Product: http://www.digitrax.com/products/command-stations-boosters/db210-opto/