|
Digitrax Power Management System-PM42
 |
Get the benefits of short circuit management and auto
reversing without adding more boosters!
PM42 Quad Power Manager lets you use a single booster and
divide its output into 4 power sub-districts for automatic
reversing &/or to improve operation by preempting booster
shutdown when a short circuit is detected by the PM42. If
you want to improve operation but don't need the added power
(or expense) of adding a booster, the PM42 is the right
answer for you. Each PM42 can run 4 sub-districts off a
single booster in any combination of regular sub-districts
and auto reversing sub-districts.
|
$79.95 msrp (Less than $20 per sub-district)
Click here for PM42 Manual
Click here for Application Note: Using PM42 with Zephyr/DCS50
|
PM4 to PM42 Upgrade Kit $9.99 msrp
Current PM4 users can upgrade their units for the new features
of the PM42 by changing the chip on the board and re-programming
the PM42 for their operation. The PM42 gives you 2 additional
faster short circuit detection sensitivity settings.
If your existing PM4s are doing what you need them to do, there
is no need to upgrade them.
Click here for PM4 to PM42 Upgrade
Instructions
Click Here for PM42 Questions and Troubleshooting:
|
