CV# |
Feature |
Default |
Range |
Notes |
2 Digit and 4 Digit Addressing |
|
|
|
|
01 |
2 Digit Decoder Address |
003/X03 |
001-127 |
|
17 |
4 Digit Address Hi Byte |
000/X00 |
0128-9983 |
CV17 & 18 are used |
18 |
4 Digit Address Lo Byte |
000/X00 |
0128-9983 |
together |
29 |
Configuration Register |
006/x06 |
Table 29 |
|
Configuration Register |
|
|
|
|
29 |
Configuration Register |
006/x06 |
Table 29 |
|
| |
Speed Step Control |
28/128 |
14 or 28/128 |
|
| |
Speed Table On/Off |
Off |
Speed Table On or Off |
|
| |
Analog Mode Conversion On/Off |
On |
On or Off |
|
| |
Normal Direction of Travel (NDOT) |
Fwd |
Fwd/Rev |
|
| |
Address Selection, 2 or 4 digit |
2 Digit |
2 or 4 Digit |
|
LocoMotionTM |
|
|
|
|
Acceleration & Deceleration |
|
|
|
|
03 |
Acceleration Rate |
000/x00 |
000/x00 to 031/x1F |
128 Steps |
04 |
Deceleration Rate |
000/x00 |
000/x00 to 031/x1F |
128 Steps |
Three Step Speed Table-Start, Mid, Max Voltage |
|
02 |
Start Voltage |
000/x00 |
000/x00 to 255/xFF |
128 Steps |
05 |
Maximum Voltage |
000/x00 |
000/x00 to 255/xFF |
128 Steps
000/x00, 001/x01 & 255/xFF= max voltage at step 28 |
06 |
Mid Point Voltage |
000/x00 |
000/x00 to 255/xFF |
128 Steps
000/x00 & 001/x01= straight line curve |
28 Step Speed Tables |
|
|
|
|
65 |
Kick Start value |
000/x00 |
|
128 Step Interpolated |
66 |
Forward Trim |
000/x00 |
|
128 Step Interpolated |
67 |
First Speed Table Entry |
000/x00 |
|
128 Step Interpolated |
68-93 |
28 Step Speed Table Entries |
000/x00 |
|
128 Step Interpolated |
94 |
Maximum Speed Table Step |
000/x00 |
|
128 Step Interpolated |
95 |
Reverse Trim |
000/x00 |
|
128 Step Interpolated |
29 |
Configuration Register |
006/x06 |
Table 29 |
Set to enable speed tables |
Torque Compensation & Switching Speed |
|
|
|
|
53 |
Not Available |
|
|
Not Available |
54 |
Torque Compensation
Switching Speed |
|
|
Not Available |
Functions |
|
|
|
|
13 |
DC Functions ON |
000/x00 |
Table 13 |
|
Configurable Strobes |
|
|
|
|
49 |
F0F,forward light effect |
000/x00 |
Config Strobe Table |
|
50 |
F0R, reverse light effect |
000/x00 |
Config Strobe Table |
|
61 |
Enable Configurable Strobe |
000/x00 |
000/x00 off or
001/x01 on |
|
Standard, FX & FX3 Functions |
|
|
|
|
49 |
F0F, forward light effect white |
|
|
Not Available |
50 |
F0R, reverse light effect yellow |
|
|
Not Available |
51 |
F1, Function 1 green |
|
|
Not Available |
52 |
F2, Function 2 violet |
|
|
Not Available |
53 |
F3, Function 3 brown |
|
|
Not Available |
54 |
F4, function 4 white/yellow |
|
|
Not Available |
115 |
F5, Function F5 white/green |
|
|
Not Available |
116 |
F6, Function F6 white/blue |
|
|
Not Available |
62 |
FX Rate and Keep alive adjust |
|
|
Not Available |
63 |
Ditch Light Blink hold time |
|
|
Not Available |
Directional Headlights, Transponding, Split Field Motor |
|
|
|
|
61 |
Directional Headlight |
000/x00 |
Dir or Non-Dir |
|
| |
Transponding |
Off |
Off or On See Table 61 |
|
| |
Split Field Motor |
|
|
Not available |
Scaleable Speed Stabilization |
|
|
|
|
55 |
Static Compensation |
000/x00 |
000/x00 to 255/xFF |
|
56 |
Dynamic Compensation |
000/x00 |
000/x00 to 255/xFF |
|
57 |
Speed Stabilizer-Droop |
000/x00 |
000/x00 to 015/x0F |
|
SuperSonic |
|
|
|
|
09 |
Motor Frequency SuperSonic |
|
|
Not available |
Advanced Consisting |
|
|
|
|
19 |
Advanced Consist Address |
000/x00 |
000/x00 to 255/xFF |
Default is OFF |
21 |
Advanced Consist Function Control Override for F1-F8 |
|
|
Not available |
22 |
Advanced Consist Function Control Override for F0 & F9-F12 |
|
|
Not available |
Function Remapping |
|
|
|
|
33-46 |
Function Remapping CVs |
|
|
Not available |
Decoder Factory Reset |
|
|
|
|
08 |
Reset Decoder to Factory Default CV Values |
|
|
Not available |
IDs |
|
|
|
|
105 |
User Private ID #1 |
000/x00 |
000/x00 to 255/xFF |
|
106 |
User Private ID #2 |
000/x00 |
000/x00 to 255/xFF |
|
07 |
Version ID |
EF, AF, E0 or E1 |
EF, AF, E0, E1 |
Read Only |
08 |
Manufacturer ID |
129/X81 |
129/x81 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
