Digitrax.com: Applications Note: Decoder Installation For PROTO 2000 E6/E7 with Mars Light With P2K 8 Pin Plug/Light Board in HO Scale


		Starter Sets Mobile Decoders Sound Decoders Stationary Decoders Throttles Boosters Power Management Power Supplies Wireless Control Computer Control Detection and Signaling Transponding Accessories


		Digitrax Decoder Installation For PROTO 2000 E6/E7 with Mars Light With P2K 8 Pin Plug/Light Board in HO Scale Remove 8 pin dummy plug from P2K light board Unsolder the yellow wire from pin 2 and re-solder it to pin 3 (empty pin) on the decoder harness plug. We strongly recommend that you mark the decoder and/or harness so that you will remember that you have modified it. If you use the decoder and/or harness modified in this manner in a different locomotive, your lights will not work correctly. Plug the decoder and harness into the light board in the locomotive. Program CVs as follows: CV33 = 001, CV34 = 003, CV35 = 002 Use F1 to control Mars light on/off.

	Digitrax is a proud sponsor of the World’s Greatest Hobby Program!
	Zephyr was chosen as the Most Innovative Product by Readers of Model Railroader Magazine and was selected as the Best New Model Railroad Accessory by Hobby Outlook Magazine!