Help us make our applications notes better! Send comments to techsupport@digitrax.com

Index to Application Notes

• Operating Digitrax Products

• Decoder Programming Notes (Non-sound)
  
  SoundFX Decoder Programming Notes [New]

• Digitrax Decoder Installation Application Notes

• Digitrax Stationary Decoder Installation/Application Notes [New]

• Troubleshooting Digitrax Products

• Using Digitrax Equipment with DCC products built by other manufacturers

• Using Digitrax Decoders with AC Motors and “Lionel” Type E Units

• CTX/CTY Throttles for Challenger Sets
  
  

		For the latest copies of all Digitrax Product Manuals in PDF format, click here. The latest version of Acrobat reader is available free for download from Adobe.

Operating Digitrax Products

• Some quick tips on how to use the Digitrax DT300 throttle [New].
  
  
• Some quick tips on how to use the Digitrax DT400 throttle [New].
  
  
• Some Troubleshooting Tips on DCC systems in general [New].
  
  
• Using MS100 with USB Port
  
  
• Advanced Consisting 101 This section supplements our manuals on the subject of Advanced Consisting. Digitrax recommends UniVersal Consisting to those using DCS100 or DB150 Command Stations.

• DT100 Basic Throttle Operation Instructions Simplified DT100 operating instructions courtesy of Alan Mitchell, tested by the Raisin Valley Model Railroad Club in Blissfield, Michigan.

• Testing Decoders Using LT1 On a Genesis Starter Set

• LocoNet Wiring Includes information about track wiring, LocoNet wiring and wiring for track detection.

• How to Measure Track Voltage on DCC Layouts with Direct Home Wiring

• Brake District Set Up This is a PDF document with detailed information for setting up a brake district with one or more brake sections on your layout. This is interesting if you want to have trains automatically stop at stations around the layout.

• Setting Up Ditch Lights with Digitrax FX Decoders Wiring & programming instructions for prototypical ditch lights.

• Function Remapping

• Advanced Transponding Application Note

• BDL162 Planning Worksheet

• BDL162 Detection Section-Increasing the Threshold Sensitivity

• BDL162 Heatsink Application Note-For Large Scale Operations

• PM42 Short Circuit/Auto Reversing Failure When Used with Zephyr (DCS50)

Back to Index

Decoder Programming Notes

• Function Remapping

• Setting Up Ditch Lights with Digitrax FX Decoders Wiring & programming instructions for prototypical ditch lights.

• Setting Up Scaleable Speed Stabilization

• DZ121 Configurable Strobe Lighting

• DZ121 Programming Note RE: Short Address Programming

Back to Index

SoundFX (and Sound related) Decoder Programming Notes

• Programming MRC Sound decoders on the Main using Hexidecimal
  conversion for CVs 17 and 18 [New]

• Tower 55 Technical Bulletin #1.1
  Performing factory decoder reset using Digitrax Zephyr (DCS50)

• Tower 55 Technical Bulletin #1.2
  Performing factory decoder reset using Digitrax DCS100 & DT400/DT400R

• Tower55 Technical Bulletin #2.1
  Programming a 4-digit address using Digitrax Zephyr (DCS50)

Back to Index


Digitrax Decoder Installation Application Notes

• Roundhouse "Critter" Decoder Installation [NEW]

• Athearn Genesis SD70 Ditch Light setup [NEW]

• Using Digitrax Decoders with AC Motors and “Lionel” Type E Units

• Bachmann Thomas the Tank This link is to one of our Digitrax Authorized Dealers.

• Proto 2000 E6/E7 Mars Light Installation

• Athearn N-Scale P59PHI Installation Instructions

• Aristocraft Alco FA-1 DG383AR CAUTION

• SoundTraxx Sierra Sound with DG383AR, DG583AR & DG583S

• Life-Like PROTO2000 GP60/SD60M CAUTION

• Life-Like GP38-2 CAUTION

• Life-Like P2K diesels with Number Board Lights and the use of the Digitrax DH163L0 decoder

• DG383AR PinOut for those who want to use this as a wired decoder

• Kato HO SD80/90MAC DCC Installation Notes

• Bachmann Spectrum 0-6-0T (courtesy of Green Steam Products)

• Bachmann Hogwart’s Express

• North Raleigh Model RR Club N Scale Installation pages

  Replacement frames, frame modification instructions,

  specific instructions for many locos including

  Atlas EMD GP9 Diesel (Kato version)

  Atlas EMD GP30/GP35 Diesel

  Atlas GE U25B Diesel

  Bachmann 0-6-0 Steam Switcher

  ConCor 4-6-4 Hudson Steam Loco

  ConCor 4-6-6-4 Challenger Steam Loco

  ConCor Alco PA-1/PB-1 Diesel

  ConCor Budd 1/2/3 Rail Diesel Cars

  ConCor GE U50 Diesel

  ConCor UP Gas Turbine

  Life-Like Alco FA2 Diesel

  Life-Like EMD F7A Diesel

  Life-Like EMD GP18 Diesel

  Kato EMD E8/E9 A/B Diesel

  Kato EMD F3/F7 A/B Diesel

  Kato GE C30-7 Diesel

  Kato 2-8-2 Mikado Steam Loco

  Key 2-8-0 Consolidation Steam Loco

  Key 4-8-4 Northern Steam Loco

  Minitrix GE U28B/U30CG Diesel

  Overland Models GE AMD-103 Diesel

• Installation of DN142 in Atlas RS1, RS3 & RSD4/5’s (HO)

• DN149K2 Installation in Kato C44-9W gives speed stabilization and transponding

• Digitrax Decoder Installation for Proto2000 E8/E9 (HO Scale)

• Installation of Digitrax DH140 in Kato GP35 Diesel (HO Scale)

• Digitrax Decoder Installation for Athearn Locomotives (HO Scale)

• Installation of Digitrax DN140 in Atlas/Kato GP30/35 (N scale)

• Installation of Digitrax DN93 or DN140 in Bachmann Spectrum F40PH

Installation of Digitrax DN93 in Life Like N scale GP18
Courtesy of Springhaven Shops

• Installation of Digitrax DH140 in Bachman Plus ABA F7's

• Installation of DG380 in Bachman Shay Courtesy of Ross Webster

• Converting Kato AC4400CW's to DCC Courtesy of Ken Bessler

Back to Index

Digitrax Stationary Decoder Installation/Application Notes [New]

• Download Version 2 of the DS64 manual

• View DS64 Application notes

Back to Index

Troubleshooting Digitrax Equipment

• Troubleshooting Digitrax Mobile Decoders

• Some Troubleshooting Tips on DCC systems in general [New]
  
  
• Troubleshooting Digitrax Command Stations and Boosters
  
  
• Troubleshooting Digitrax DS54 Stationary Decoders
  
  
• Loconet Checker This program helps you to manage your Digitrax devices connected to the LocoNet bus and monitor their behaviour.  It ensures that all devices have the correct settings. Note: This is Freeware provided courtesy of Stefan Trachsler, and linked to for the benefit of Digitrax customers. No warranties expressed or implied by Digitrax.

Back to Index

Using Digitrax Equipment with other DCC systems

• Broadway Limited Locomotives

• Status editing and using decoders that don't use 128 speed steps and/or paged mode programming with Digitrax

• Programming Digitrax DA120 Decoder (Atlas GP40-2) with System One and Lenz

• Operating the Roco Crane with Digitrax

• Using Digitrax Boosters with Lenz Systems

• Using Lenz LV100 Booster with Digitrax DT200 Command Station

• Using Lenz LV100 Booster with LocoNet

• Using Digtrax Boosters with Marklin 6027 Command Station

• Operating Keller SU1990 Sound Unit with Digitrax Decoders

Back to Index

Build your own CTX and CTY Throttles for use with your Challenger Starter Set